Description
Description:
High-strength, solvent-based silicone-based paint with a textured texture, suitable for interior and exterior metal surfaces. This type of Heavy Metal Silicon contains a high percentage of iron oxide grains, which gives the painted surface a special decorative finish and at the same time offers high resistance to corrosion and ultraviolet (UV) radiation. It can also be used for painting wood.
Features:
- Color: Graphite - Base
- Packaging: 2,139Lt
- Indoor & Outdoor Use
- Embossed Finish
Preparation:
The surfaces must be cleaned with Brush Thinner T 300, dry and smooth, free of dust, oils and sanded with suitable sandpaper. Wooden surfaces, after appropriate pre-treatment (treatment with Diaxyl Extra wood preservative, filling, spatulating with Acrylic Putty and sanding), are primed with Velatura. Then, the surface is rubbed with suitable sandpaper and the dust is removed. Metal surfaces are primed with anti-rust primer (Anti-Rust Primer, Minio Primer or Metal Primer). After it is completely dry, it is sanded with suitable sandpaper, the dust is removed. Shiny metal surfaces (galvanized, aluminum, etc.) are primed with Shiny Surface Primer or Wash Primer.
Application:
The product is stirred well before use. Due to its high iron oxide content, it can be applied to metal surfaces without a primer, as long as the film thickness is sufficient (at least 100 μm). It is applied in two coats with a roller or brush diluted 5% with Brush Thinner T 300 or an airless gun diluted 10-15% with Gun Thinner T 350. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 80%. The product is dry to the touch in 2-3 hours and can be recoated after 16-18 hours. These times vary depending on weather conditions (relative humidity and temperature). Rollers, brushes and floor stains are cleaned with Brush Thinner T 300 and then with soap or detergent. Guns are cleaned with Gun Thinner T 350.
Manufacturer: VITEX
