Description
Description:
Very high-strength matte NANO – ACRYLIC innovative paint for exterior masonry surfaces, trihybrid nanotechnology (TRIBRID NANO TECHNOLOGY: Silica – Acrylic – Silicone). Its use avoids application delays due to extreme weather conditions and extends the painting season. It offers top quality, brighter, more color-stable and cleaner facades, since it prevents, due to its properties, the deposition of inorganic, organic and biological pollutants (e.g. fungi, algae) over time. Its strong inorganic base allows the surfaces being painted, when wet, to dry quickly and "breathe". Due to its excellent adhesion, it can be applied to new and old surfaces made of plaster, concrete, silicate and silicone paints, ETICS, etc. with the appropriate preparation. Acrylan MAX, based on trihybrid nanotechnology, combines all the advantages of silicate, acrylic and silicone paints, offering high value to buildings where it is used as paint and protection, offering lower maintenance costs due to its significantly longer life on these surfaces as well as a very low carbon footprint in its life cycle. Acrylan MAX is certified by the University of Athens, Department of Physics, for its properties as a cool paint and is characterized by a high reflectance value (SR), a high emissivity coefficient (ε) and a high solar reflectance index (SRI).
Feature:
- Color: White
- Packaging: 3L
- MAX resilience to climate change
- MAX adaptation to the risk of extreme weather events
- MAX extension of the painting season
- MAX durability and traction
- MAX resistance to soiling from rain and atmospheric pollutants
- MAX color stability
- MAX surface transpiration
Preparation:
The surfaces must be clean, dry and smooth, free of dust, oil or any loose materials. Acrylic Putty is used for filling holes and filling any cracks. It is recommended to prime old surfaces with Vitosin, while old surfaces with silicate and silicone paints are primed with Acrylan MAX diluted by 15%. New surfaces made of plaster, concrete, bricks, etc., as well as filled surfaces are primed with Durovit or Acrylan Unco Eco. In the case of dark shades on the surfaces, it is recommended to apply a pre-colored primer Vitex PreColor Primer, depending on the final shade and based on the color wheel.
Application:
The product is stirred well before use. It is applied in two coats with a roller, brush or airless gun and diluted up to 10% with water. It is applied even when the temperature of the air, surface and material ranges from 5°C to 45°C for 50% RH. Maximum application humidity 80%.
The use of Acrylan MAX significantly reduces drying and recoating times. Drying to the touch is 30-45 minutes and recoating time 1-2 hours at 25°C and 50% relative humidity. Drying and recoating times depend on temperature, humidity, wind and film thickness.
The application of the paint can be completed 30 -60 minutes before the appearance of rain or dew depending on the shade (from 5°C and above and relative humidity 50 -70%). Lower temperatures and higher humidity may increase the time for readiness for rain. Tools are cleaned immediately after use with water and if necessary with soap or detergent.
Manufacturer: VITEX
