Description
Description:
New technology white water-based acrylic resin-based primer for exterior and interior use, tinted using the Vitex Tinting System and increasing coverage by reducing the number of coats of the final paint required. It achieves the ideal balance of light absorption and scattering, in order to fully and quickly render the shade of the final paint. It is very opaque, easy to apply, dries quickly, has high performance and is a suitable primer for all water-soluble paints. It improves the appearance, coverage, adhesion and durability of the final paint.
Features:
- Indoor & Outdoor Use
- Color: White
- Packaging: 3L
Preparation:
The surfaces must be clean, dry and smooth, free of dust, oil or any loose materials. Acrylic Putty is used to fill holes and fill any cracks. New surfaces made of plaster, concrete, cement mortar, marble mortar, gypsum boards, etc., as well as filled surfaces, are smoothed with sandpaper. Then, after removing the dust, the surfaces are primed with Vitex PreColor Primer.
Application:
The product is stirred well before use. It is applied in one coat with a roller or brush without dilution or an airless gun with a dilution of 5 - 10% with water. It should not be applied at temperatures lower than 5οC, higher than 35οC and/or relative humidity above 80%. The product is dry to the touch in 30-60 minutes and can be repainted after 3-4 hours with Vitex plastic or acrylic paints. These times vary depending on weather conditions (relative humidity and temperature).
Manufacturer: VITEX
