Description
Description:
Water repellent and stain protector, impregnation that emphasizes the natural colors of the stone. It is suitable for waterproofing marble, granite, stone, bricks, ceramics, cement. It protects surfaces from water, coffee, dirt, etc. It does not create a film, it penetrates very deeply into the pores of the marble and seals them, making the surface repel water and other liquids. After applying the waterproofer, stains can be easily cleaned, since their penetration into the pores of the marble is prevented. It has a mild odor. It does not prevent the transpiration of the pores of the rocks while at the same time protecting them from surface cracks, salts and damage from frost.
Used In:
- POLISHED MARBLES
- POLISHED GRANITES
- NATURAL & ARTIFICIAL STONE
- POROLITHOUS
- LIMESTONES
- CEMENT
Features:
- Color: Transparent
- Odor: Solvent
- Packaging: 750ml
- ISO EN 1925
Instructions for Use:
Always ensure that the application area is adequately ventilated. On a well-cleaned and dry surface, apply the liquid without dilution with a brush, roller or spray in one or more layers, spreading out any liquid residues. The second layer should be applied after 5 to 10 minutes, while the surface is still damp. Any residues can be removed after 2 hours. In case they remain for longer, they can be removed with a cloth slightly moistened with the waterproofing agent. The brush or roller can be cleaned with white spirit after the end of the application. The surface can be used after two to three hours, while maximum protection is achieved after the material has fully cured. The material needs 24 – 48 hours to fully cure, depending on the humidity conditions.
Manufacturer: APOLLON ABRASIVES
